Home
     

Proficiency and Capability

Requirements from oil and gas companies come in all shapes and sizes. Regardless of how big they are or how complex, they all have to be quality made, and done on time. Our state of the art facilities can offer both; housing all the technology to deliver precision products and the capacity to meet important deadlines

Preparation/Fabrication/Assembly Bays

Hoisting and Lifting:

  • 3 – 20 ton and 1 – 25 ton overhead bridge cranes, each complete with 1 auxiliary 5 ton high speed hoist.
  • Under crane hook clearance of 36 feet.
  • Crane rails extend 60 feet outside of building for loading/offloading ease.
  • 1 – 20 ton battery powered, rail mounted transfer cart.
  • 4 – 1 ton wall mounted Jib cranes
  • 1 – 1.5 ton wall mounted Jib crane
  • 4 – 2 ton wall mounted Jib cranes

Shop Equipment: 

  • Submerged Arc Welder Number 1
    Model Lincoln Powerwave AC/DC 1000 Power Source
    Pandjuris Manipulator and base
    Flux recovery system
  • Submerged Arc Welder Number 2
    Lincoln Power Source
    Flux recovery system
  • Welding Machines
    Three (3) Lincoln Powerwave 455M/STT
    Fifteen (15) Lincoln Powerwave 355M
    One (1) Lincoln Pro-cut 55
    One (1) Airco 3DDRS-245C
    One (1) Miller CP-200
    Three (3) Miller Dimension 400
    One (1) Lincoln Idealarc DC-600
    One (1) Miller Dimension 302
    Seven (7) Miller Dimension 450
    Two (2) Miller SRJ-333
  • One (1) Miller Syncrowave 250
  • Circle Cutter
    Cypress CB-2 Circle Cutter
  • Circle Welder
    Cypres CW-7 Circle Welder 6” to 24”
  • Positioners
    Three (3) 1500-2000 # Welding Positioners
  • Power Rolls
    Two (2) sets of Pandjuris 30 ton capacity turning rolls with idlers
    12 ton turning rolls with idler
    Six (6) sets of Misc. turning rolls with idlers
  • Band Saws
    Hi-Tech, Model M-20A Large Band Saw w/ Mitering Capabilities
    Hyd-Mech, Model S-20 Series 2 Band Saw
  • Ironworker
    One (1) Uni-Hydro, Model 66.24 Ironworker
  • Press
    One (1) Ten ton Press
  • Drill Press
    One (1) Nardini, Model FR1050
    One (1) Feeler, Model 5600B
  • Loader
    One (1) 2006 John Deer Loader Model 544J
    160 HP Motor
  • Trucks
    One (1) 5 Ton Truck c/w Highboy Trailer
    One (1) 1 Ton Truck c/w Gooseneck Trailer
    Two (2) ¾ Ton Service Truck

Heavy Load Area:

Designated heavy load areas have been established for loads that exceed the limits of our 8” industrial concrete slab.

Hydro Test Area:

A controlled, designated area has been established within the shop for hydro testing. All hydro tests are completed with potable water.